Barco Simulation Projector Repairs
for High-Fidelity Training Systems
Specialist repair and calibration for Barco simulation projectors used in flight, maritime, driving and military training environments.
Reliability for
Mission-Critical Training
Barco's simulation projectors are engineered for demanding duty cycles and stringent visual requirements. Image quality, latency, and reliability are directly linked to training outcomes.
Our engineering team focuses on preserving that performance – from NVG-compliant IR output and high-refresh operation through to precise colour and geometric alignment across multi-channel arrays.
- F-Series & FS-Series NVG support.
- F400 & FL40 high-refresh maintenance.
- Pulse Electronics platform diagnostics.
Barco Simulation Projector Portfolio
We support the complete range of specialised simulation projectors.
F-Series (General)
Core simulation models including F70, F80 and F90 families. Designed for long duty cycles, stable light output and high reliability.
FS-Series (NVG)
Dedicated NVG support through enhanced IR capabilities. We calibrate IR intensity for night vision training scenarios.
High Performance
Native 4K resolution and processing speeds up to 240 Hz for high-end training systems where realism and low latency are critical.
Representative Model Overview
A reference guide for the core simulation models we service.
| Series | Model | Resolution | Refresh Rate | Key Features |
|---|---|---|---|---|
| F400 Series | F400-4K, F400-N4K | Native 4K | Up to 240 Hz | High-speed processing, Barco Pulse, Low Latency |
| FS400 Series | FS400-N4K | Native 4K | Up to 240 Hz | NVG Supported (Dedicated IR), Pixel-shifting |
| FL40 Series | FL40-4K MKII | 4K UHD | Standard | LED Light Source, Long Lifespan, Robust |
| F70 Series | F70-4K6 | 4K UHD | Standard | Laser Phosphor, Barco Pulse, Blending/Warping |
| FS70 Series | FS70-4K6 | 4K UHD | Standard | NVG Supported, Laser Phosphor |
| I-Series | I600-4K10 | 4K UHD | Standard | High Image Quality, Installation Flexible |
Common Simulation Faults
Faults in simulation are often linked to long duty cycles and complex geometry.
IR / NVG Imbalance
Symptom: Reduced IR output leaving NVG trainees with inconsistent scenes across the dome.
Cause: Degradation of specific LEDs or laser channels responsible for IR.
High-Refresh Instability
Symptom: Projectors refusing to operate at 120–240 Hz or showing intermittent drop-outs.
Cause: Signal bandwidth limitations or marginal electronics in the input chain.
Geometry & Edge-Blend Drift
Symptom: Gradual misalignment of channels on domes, visible blend seams.
Cause: Hardware ageing or component replacement shifting optical alignment.
| Symptom | Potential Cause |
|---|---|
| Noticeable Lag/Stutter | Latency build-up in processing chain |
| Hot Fan Noise | Dust accumulation or obstructed air paths |
| IR Scene Mismatch | Imbalance between visible and IR output |
| Intermittent Drop-outs | Instability in power supplies or Pulse platform |
Book Your Simulation Repair
Contact our Doncaster or Dublin service centre for specialized support.
Book Repair